Sodium amide

From Wikipedia, the free encyclopedia

(Redirected from Sodamide)
Jump to: navigation, search
Sodium amide
Other names Sodamide
Identifiers
CAS number 7782-92-5
Properties
Molecular formula NaNH2
Molar mass 39.01 g/mol
Appearance gray powder (colourless when pure)
Density 1.37 g/cm3, solid
Melting point

210 °C
Boiling point

400 °C
Solubility in water reacts
Basicity (pKb) 33
Structure
Coordination
geometry		 tetrahedral at Na and N
Hazards
EU classification not listed
Flash point Non-flammable.
Related Compounds
Other anions Sodium bis(trimethylsilyl)amide
Other cations Potassium amide
Related compounds Ammonia
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)
Infobox disclaimer and references

Sodium amide, commonly called sodamide, is the chemical compound with the formula NaNH2. This solid, which is dangerously reactive toward water, is white when pure, but commercial samples are typically gray due to the presence of small quantities of metallic iron from the manufacturing process. Such impurities do not usually affect the utility of the reagent. NaNH2 has been widely employed as a strong base in organic synthesis.

Contents

Sodium amide can be prepared by the reaction of sodium with ammonia gas,[1] but it is usually prepared by the reaction in liquid ammonia using iron(III) nitrate as a catalyst. The reaction is fastest at the boiling point of the ammonia, ca. -33 °C.[2]

2 Na + 2 NH3 → 2 NaNH2 + H2

NaNH2 is a salt-like material and as such, crystallizes as an infinite polymer.[3] The geometry about sodium is tetrahedral.[4] In ammonia, NaNH2 forms conductive solutions, consistent with the presence of Na(NH3)6+ and NH2- anions.

Sodium amide is used in the industrial production of indigo, hydrazine, and sodium cyanide.[5] It is the reagent of choice for the drying of ammonia (liquid or gaseous) and is also widely used as a strong base in organic chemistry, often in liquid ammonia solution. One of the main advantages to the use of sodamide is that it is an excellent base and rarely serves as a nucleophile. It is however poorly soluble and its use has been superseded by the related reagents such as sodium hydride, sodium bis(trimethylsilyl)amide (NaHMDS), and lithium diisopropylamide (LDA).

Sodium amide induces the loss of two molecules of hydrogen bromide from a vicinal dibromoalkane to give a carbon-carbon triple bond, as in the preparation of phenylacetylene below.[6]

Hydrogen chloride and/or ethanol can also be eliminated in this way,[7] as in the preparation of 1-ethoxy-1-butyne.[8]

Where there is no β-hydrogen to be eliminated, cyclic compounds may be formed, as in the preparation of methylenecyclopropane below.[9]

Cyclopropenes,[10] aziridines[11] and cyclobutanes[12] may be formed in a similar manner.

Carbon acids which can be deprotonated by sodium amide in liquid ammonia include terminal alkynes,[13] methyl ketones,[14] cyclohexanone,[15] phenylacetic acid and its derivatives[16] and diphenylmethane.[17] Acetylacetone loses two protons to form a dianion.[18]

Sodium amide will also deprotonate indole[19] and piperidine.[20]

  • Rearrangement with orthodeprotonation[21]
  • Oxirane synthesis (by carbene reaction?)[22]
  • Indole synthesis[23]

Sodium amide reacts violently with water to produce ammonia and sodium hydroxide: and will burn in air to give oxides of sodium and nitrogen.

NaNH2 + H2O → NH3 + NaOH
2NaNH2 + 4O2 → Na2O2 + 2NO2 + 2H2O

In the presence of limited quantities of air and moisture, such as in a poorly closed container, explosive mixtures of oxidation products can form. This is accompanied by a yellowing or browning of the solid. As such, sodium amide should always be stored in a tightly closed container, if possible under an atmosphere of nitrogen gas. Sodium amide samples which are yellow or brown in color should be destroyed immediately: one method for destruction is the careful addition of ethanol to a suspension of sodium amide in a hydrocarbon solvent.

Sodium amide may be expected to be corrosive to the skin, eyes and mucous membranes. Care should be taken to avoid dispersal of the dust.

  1. ^ Bergstrom, F. W. (1955). "Sodium amide". Org. Synth. Coll. Vol. 3:778.
  2. ^ Greenlee, K. W.; Henne, A. L. (1946). "Sodium Amide". Inorganic Syntheses 2:128–35.
  3. ^ Zalkin, A.; Templeton, D. H. "The Crystal Structure Of Sodium Amide" Journal of Physical Chemistry 1956, Volume 60, pp 821 - 823. DOI: 10.1021/j150540a042
  4. ^ Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN 0-19-855370-6.
  5. ^ Merck Index (12th Edn.)
  6. ^ Campbell, Kenneth N.; Campbell, Barbara K. (1950). "Phenylacetylene". Org. Synth. 30:72; Coll. Vol. 4:763.
  7. ^ Jones, E. R. H.; Eglinton, Geoffrey; Whiting, M. C.; Shaw, B. L. (1954). "Ethoxyacetylene". Org. Synth. 34:46; Coll. Vol. 4:404.
    Bou, Anna; Pericàs, Miquel A.; Riera, Antoni; Serratosa, Fèlix (1987). "Dialkoxyacetylenes: di-tert-butoxyethyne, a valuable synthetic intermediate". Org. Synth. 65:68; Coll. Vol. 8:161.
    Magriotis, Plato A.; Brown, John T. (1995). "Phenylthioacetylene". Org. Synth. 72:252; Coll. Vol. 9:656.
    Ashworth, P. J.; Mansfield, G. H.; Whiting, M. C. (1955). "2-Butyn-1-ol". Org. Synth. 35:20; Coll. Vol. 4:128.
  8. ^ Newman, Melvin S.; Stalick, W. M. (1977). "1-Ethoxy-1-butyne". Org. Synth. 57:65; 6:564.
  9. ^ Salaun, J. R.; Champion, J.; Conia, J. M. (1977). "Cyclobutanone from methylenecyclopropane via oxaspiropentane". Org. Synth. 57:36; Coll. Vol. 6:320.
  10. ^ Nakamura, Masuharu; Wang, Xio Qun; Isaka, Masahiko; Yamago, Shigeru; Nakamura, Eiichi (2003). "Synthesis and (3+2)-cycloaddition of a 2,2-dialkoxy-1-methylenecyclopropane: 6,6-dimethyl-1-methylene-4,8-dioxaspiro(2.5)octane and cis-5-(5,5-dimethyl-1,3-dioxan-2-ylidene)hexahydro-1(2H)-pentalen-2-one". Org. Synth. 80:144.
  11. ^ Bottini, Albert T.; Olsen, Robert E. (1964). "N-Ethylallenimine". Org. Synth. 44:53; Coll. Vol. 5:541.
  12. ^ Skorcz, J. A.; Kaminski, F. E. (1968). "1-Cyanobenzocyclobutene". Org. Synth. 48:55; Coll. Vol. 5:263.
  13. ^ Saunders, J. H. (1949). "1-Ethynylcyclohexanol". Org. Synth. 29:47; Coll. Vol. 3:416.
    Peterson, P. E.; Dunham, M. (1977). "(Z)-4-Chloro-4-hexenyl trifluoroacetate". Org. Synth. 57:26; Coll. Vol. 6:273.
    Kauer, J. C.; Brown, M. (1962). "Tetrolic acid". Org. Synth. 42:97; Coll. Vol. 5:1043.
  14. ^ Coffman, Donald D. (1940). "Dimethylethynylcarbinol". Org. Synth. 20:40; Coll. Vol. 3:320.
    Hauser, C. R.; Adams, J. T.; Levine, R. (1948). "Diisovalerylmethane". Org. Synth. 28:44; Coll. Vol. 3:291.
  15. ^ Vanderwerf, Calvin A.; Lemmerman, Leo V. (1948). "2-Allylcyclohexanone". Org. Synth. 28:8; Coll. Vol. 3:44.
  16. ^ Hauser, Charles R.; Dunnavant, W. R. (1960). "α,β-Diphenylpropionic acid". Org. Synth. 40:38; Coll. Vol. 5:526.
    Kaiser, Edwin M.; Kenyon, William G.; Hauser, Charles R. (1967). "Ethyl 2,4-diphenylbutanoate". Org. Synth. 47:72; Coll. Vol. 5:559.
    Wawzonek, Stanley; Smolin, Edwin M. (1951). "α,β-Diphenylcinnamonitrile". Org. Synth. 31:52; Coll. Vol. 4:387.
  17. ^ Murphy, William S.; Hamrick, Phillip J.; Hauser, Charles R. (1968). "1,1-Diphenylpentane". Org. Synth. 48:80; Coll. Vol. 5:523.
  18. ^ Hampton, K. Gerald; Harris, Thomas M.; Hauser, Charles R. (1971). "Phenylation of diphenyliodonium chloride: 1-phenyl-2,4-pentanedione". Org. Synth. 51:128; Coll. Vol. 6:928.
    Hampton, K. Gerald; Harris, Thomas M.; Hauser, Charles R. (1967).
  19. ^ Potts, K. T.; Saxton, J. E. (1960). "1-Methylindole". Org. Synth. 40:68; Coll. Vol. 5:769.
  20. ^ Bunnett, J. F.; Brotherton, T. K.; Williamson, S. M. (1960). "N-β-Naphthylpiperidine". Org. Synth. 40:74; Coll. Vol. 5:816.
  21. ^ Brazen, W. R.; Hauser, C. R. (1954). "2-Methylbenzyldimethylamine". Org. Synth. 34:61; Coll. Vol. 4:585.
  22. ^ Allen, C. F. H.; VanAllen, J. (1944). "Phenylmethylglycidic ester". Org. Synth. 24:82; Coll. Vol. 3:727.
  23. ^ Allen, C. F. H.; VanAllen, James (1942). "2-Methylindole". Org. Synth. 22:94; Coll. Vol. 3:597.

Retrieved from "http://en.wikipedia.org/wiki/Sodium_amide"
Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.