Pentium M

From Wikipedia, the free encyclopedia

(Redirected from Pentium-M)
Jump to: navigation, search
Pentium M
Central processing unit

Pentium M 730 core Dothan
Produced: From 2003 to 2007
Manufacturer: Intel
CPU speeds: 900 MHz to 2.26 GHz
FSB speeds: 400 MT/s to 533 MT/s
Process:
(MOSFET channel length)
0.13 µm to 0.09 µm
Instruction set: x86
Microarchitecture: P6 variant
Cores: 1
Socket: Socket 479
Core names:
  • Banias
  • Dothan
Original logo

The Pentium M brand refers to only two single-core 32-bit x86 microprocessors (with the Intel P6 microarchitecture) introduced in March 2003 (during the heyday of the Pentium 4 desktop CPUs),[1] and forming a part of the Intel Centrino platform. The Pentium M branded processors had a maximum power consumption (TDP) of 3-25 W, and were intended for use in laptop personal computers (thus the "M" moniker standing for mobile). They evolved from the core of the last Pentium III branded CPU by adding the bus interface of Pentium 4 one, an improved instruction decoding/issuing front end, improved branch prediction, SSE2 support, and a much larger cache. The first Pentium M branded CPU, codenamed the Banias, was followed by the second one - the Dothan. After the Pentium M branded processors, Intel released the Core branded dual-core mobile Yonah CPU with a modified microarchitecture. Pentium M branded CPUs can be considered as the end of the Intel P6 microarchitecture.

Contents

The Pentium M represented a new and radical departure for Intel, as it was not a low-power version of the desktop-oriented Pentium 4, but instead a heavily modified version of the Pentium III Tualatin design (itself based on the Pentium Pro core design). It is optimised for power efficiency, a vital characteristic for extending notebook computer battery life. Running with very low average power consumption and much lower heat output than desktop processors, the Pentium M runs at a lower clock speed than the laptop version of the Pentium 4 (The Pentium 4-Mobile, or P4-M), but with similar performance - a 1.6 GHz Pentium M can typically attain the performance of a 2.4 GHz Pentium 4-M.[2] The Pentium M (model 740) has been tested to perform up to about 7,400 MIPS and 3.9 GFLOPS (using SSE2).[3]

The Pentium M coupled the execution core of the Pentium III with a Pentium 4 compatible bus interface, an improved instruction decoding/issuing front end, improved branch prediction, SSE2 support, and a much larger cache. The usually power-hungry secondary cache uses an access method to avoid switching on any parts of it which are not being accessed. Other power saving methods include dynamically variable clock frequency and core voltage, allowing the Pentium M to throttle clock speed when the system is idle in order to conserve energy, using the SpeedStep 3 technology (which has more sleep stages than previous versions of SpeedStep). With this technology, a 1.6 GHz Pentium M can effectively throttle to clock speeds of 600 MHz, 800 MHz, 1000 MHz, 1200 MHz, 1400 MHz and 1600 MHz; these intermediate clock states allow the CPU to better throttle clock speed to suit conditions. The power requirements of the Pentium M varies from 5 watts when idle to 27 watts at full load. This is useful to notebook manufacturers as it allows them to include the Pentium M into smaller notebooks.

Although Intel has marketed the Pentium M exclusively as a mobile product, motherboard manufacturers such as AOpen, DFI and MSI have been shipping Pentium M compatible boards designed for enthusiast, HTPC, workstation and server applications. An adapter, the CT-479, has also been developed by ASUS to allow the use of Pentium M processors in selected ASUS motherboards designed for Socket 478 Pentium 4 processors. Shuttle Inc. offers packaged Pentium M desktops, marketed for low energy consumption and minimal cooling system noise.

Pentium M processors are also of interest to embedded systems' manufacturers because the low power consumption of the Pentium M allows the design of fanless and miniaturized embedded PCs.

As the M line was originally designed in Israel, the first Pentium M was identified by the codename Banias, named after an ancient site in the Golan Heights. Given the product code 80535, it initially had no model number suffix, but was later identified as the Pentium M 705. It was manufactured on a 130 nm process, was released at frequencies from 1.3 GHz to 1.7 GHz using a 400 MT/s FSB, and had 1 MiB of Level 2 cache. The core average TDP (Thermal Design Power) is 24.5 watts.

The CPUID signature for a Banias is 0x69X.

Pentium M 730 core Dothan backside
Pentium M 730 core Dothan backside

Intel launched its improved Pentium M, formerly known as Dothan, named after another ancient town in Israel, on May 10, 2004. Dothan Pentium M processors (product code 80536) are among the first Intel processors to be identified using a "processor number" rather than a clockspeed rating, and the mainstream versions are known as Pentium M 710 (1.4 GHz), 715 (1.5 GHz), 725 (1.6 GHz), 735 (1.7 GHz), 745 (1.8 GHz), 750 (1.86 GHz), 755 (2.0 GHz), and 765 (2.1 GHz). The processor does not support hyperthreading nor SSE3.

These 700 series Pentium M processors retain the same basic design as the original Pentium M, but are manufactured on a 90 nm process, with twice the secondary cache. Die size, at 84 mm², remains in the same neighborhood as the original Pentium M, even though the 700 series contains approximately 140 million transistors, most of which make up the 2 MiB cache. TDP is also down to 21 watts (from 24.5 watts in Banias), though power use at lower clockspeeds has increased slightly. However, tests conducted by third party hardware review sites show that Banias and Dothan equipped notebooks have roughly equivalent battery life.[citation needed] Additionally third party hardware review sites have benchmarked the Dothan at approx 10-20% better performance than the Banias in most situations.

The processor line has models running at clock speeds from 1.0 GHz to 2.26 GHz as of July 2005. The models with lower frequencies were either low voltage or ultra-low voltage CPUs designed for even better battery life and reduced heat output. The 718 (1.3 GHz), 738 (1.4 GHz), and 758 (1.5 GHz) models are low-voltage (1.116 V) with a TDP of 10 W, while the 723 (1.0 GHz), 733 (1.1 GHz), and 753 (1.2 GHz) models are ultra-low voltage (0.940 V) with a TDP of 5 W.

Revisions of the Dothan core were released in the first quarter of 2005 with the Sonoma chipsets and supported a 533 MT/s FSB and XD (Intel's name for the NX bit) (and the PAE support required for it was enabled, unlike earlier Pentium Ms that had it disabled). These processors include the 730 (1.6 GHz), 740 (1.73 GHz), 750 (1.86 GHz), 760 (2.0 GHz) and 770 (2.13 GHz). These models all have a TDP of 27 W and a 2 MiB L2 cache.

In July 2005, Intel released the 780 (2.26 GHz) and the low-voltage 778 (1.60 GHz).

The CPUID signature for a Dothan is 0x6DX.

This processor is still commercially offered, for example in the current version 701 of the Asus eeepc ultra portable laptop.

Main article: Intel Core

The next generation of processors (with a microarchitecture being a derivative of P6 found in Pentium M CPUs), codenamed Yonah, was released under the Intel Core brand, as Core Duo and Core Solo (Duo with one disabled core).

Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.